Why is the electrolytic capacitor not polarity sensitive?Can you make a non-polar electrolytic capacitor out...
What does "rhumatis" mean?
Where is the fallacy here?
“I had a flat in the centre of town, but I didn’t like living there, so …”
PTiJ: How should animals pray?
Iron deposits mined from under the city
Python 3.6+ function to ask for a multiple-choice answer
Ultrafilters as a double dual
What's the best tool for cutting holes into duct work?
Why can't we use freedom of speech and expression to incite people to rebel against government in India?
Are there other characters in the Star Wars universe who had damaged bodies and needed to wear an outfit like Darth Vader?
What is the meaning of option 'by' in TikZ Intersections
3.5% Interest Student Loan or use all of my savings on Tuition?
Short story about an infectious indestructible metal bar?
School performs periodic password audits. Is my password compromised?
Did Amazon pay $0 in taxes last year?
Where do you go through passport control when transiting through another Schengen airport on your way out of the Schengen area?
What does it mean when I add a new variable to my linear model and the R^2 stays the same?
Why would the IRS ask for birth certificates or even audit a small tax return?
What is the purpose of a disclaimer like "this is not legal advice"?
Using the imperfect indicative vs. subjunctive with si
Giving a talk in my old university, how prominently should I tell students my salary?
I've given my players a lot of magic items. Is it reasonable for me to give them harder encounters?
The (Easy) Road to Code
Deal the cards to the players
Why is the electrolytic capacitor not polarity sensitive?
Can you make a non-polar electrolytic capacitor out of two regular electrolytic capacitors?Diagnosing cause of electrolytic capacitor failingWill LEDs in opposing directions be damaged?Decoupling pair of microphones using noisy power sourceMAX682 with electrolytic capacitorsGetting opposite expected voltage with electret microphoneWhat are the purpose of those resistors and capacitors network before the mic jack?Exploding MLCC capRadically different behavior between ceramic and electrolytic capacitors in electret microphone circuitIdentifying the polarity of the aluminium electrolytic capacitor
$begingroup$
The issue
I was making a project in which I had to use a 2.2uF capacitor in series with a microphone and weirdly, the circuit works even if I toggle the polarity of the capacitor, that is the capacitor can be inserted in either polarity to make the circuit work.
Why does this happen? What are the criteria for doing so intentionally? Additionally, if I am to substitute a ceramic capacitor with an electrolytic capacitor, in what polarity should the capacitor be inserted?
Schematic:
This schematic is based on the manufacturer's schematic, in which also, a ceramic capacitor of 2.2uF is used.
This question is referring to the MIC portion of the schematic only.
microphone electrolytic-capacitor polarity
asked 2 hours ago
Utkarsh VermaUtkarsh Verma
288
$endgroup$
|
show 4 more comments
$begingroup$
The issue
I was making a project in which I had to use a 2.2uF capacitor in series with a microphone and weirdly, the circuit works even if I toggle the polarity of the capacitor, that is the capacitor can be inserted in either polarity to make the circuit work.
Why does this happen? What are the criteria for doing so intentionally? Additionally, if I am to substitute a ceramic capacitor with an electrolytic capacitor, in what polarity should the capacitor be inserted?
Schematic:
This schematic is based on the manufacturer's schematic, in which also, a ceramic capacitor of 2.2uF is used.
This question is referring to the MIC portion of the schematic only.
microphone electrolytic-capacitor polarity
asked 2 hours ago
Utkarsh VermaUtkarsh Verma
288
$endgroup$
1
$begingroup$
What was the original capacitor type? Also, there is no DC bias in that part of the circuit.
$endgroup$
– Toor
2 hours ago
1
$begingroup$
That is likely a ceramic capacitor. Unless noted otherwise you can assume all aluminum and tantalum capacitors ARE polarized. If you install them backwards across power supply rails (or they have an internal short, much less common in recent decades) they tend to go BANG with some violence, possibly charring the PCB. A ceramic capacitor is not polarized unless it has a black band or polarity mark at one end.
$endgroup$
– Sparky256
1 hour ago
$begingroup$
At millivolt level and and a small reverse bias a polarized capacitor doesn't care, at least for a short time. Over time it might die much earlier than you expect. Don't try it again.
$endgroup$
– Ale..chenski
1 hour ago
$begingroup$
@Toor What do you mean by the original capacitor type?
$endgroup$
– Utkarsh Verma
1 hour ago
$begingroup$
@Sparky256 Yes, the manufacturer recommends ceramic capacitor, but I don't have such a high valued ceramic capacitor so I used an electrolytic capacitor. As above comment states(and I checked voltage levels) there is no DC bias in that portion of the circuit. Does it imply that I can't use a polarized capacitor in such case?
$endgroup$
– Utkarsh Verma
1 hour ago
|
show 4 more comments
$begingroup$
The issue
I was making a project in which I had to use a 2.2uF capacitor in series with a microphone and weirdly, the circuit works even if I toggle the polarity of the capacitor, that is the capacitor can be inserted in either polarity to make the circuit work.
Why does this happen? What are the criteria for doing so intentionally? Additionally, if I am to substitute a ceramic capacitor with an electrolytic capacitor, in what polarity should the capacitor be inserted?
Schematic:
This schematic is based on the manufacturer's schematic, in which also, a ceramic capacitor of 2.2uF is used.
This question is referring to the MIC portion of the schematic only.
microphone electrolytic-capacitor polarity
asked 2 hours ago
Utkarsh VermaUtkarsh Verma
288
$endgroup$
The issue
I was making a project in which I had to use a 2.2uF capacitor in series with a microphone and weirdly, the circuit works even if I toggle the polarity of the capacitor, that is the capacitor can be inserted in either polarity to make the circuit work.
Why does this happen? What are the criteria for doing so intentionally? Additionally, if I am to substitute a ceramic capacitor with an electrolytic capacitor, in what polarity should the capacitor be inserted?
Schematic:
This schematic is based on the manufacturer's schematic, in which also, a ceramic capacitor of 2.2uF is used.
This question is referring to the MIC portion of the schematic only.
microphone electrolytic-capacitor polarity
microphone electrolytic-capacitor polarity
asked 2 hours ago
Utkarsh VermaUtkarsh Verma
288
asked 2 hours ago
Utkarsh VermaUtkarsh Verma
288
asked 2 hours ago
Utkarsh VermaUtkarsh Verma
288
asked 2 hours ago
Utkarsh VermaUtkarsh Verma
288
asked 2 hours ago
Utkarsh VermaUtkarsh Verma
288
288
1
$begingroup$
What was the original capacitor type? Also, there is no DC bias in that part of the circuit.
$endgroup$
– Toor
2 hours ago
1
$begingroup$
That is likely a ceramic capacitor. Unless noted otherwise you can assume all aluminum and tantalum capacitors ARE polarized. If you install them backwards across power supply rails (or they have an internal short, much less common in recent decades) they tend to go BANG with some violence, possibly charring the PCB. A ceramic capacitor is not polarized unless it has a black band or polarity mark at one end.
$endgroup$
– Sparky256
1 hour ago
$begingroup$
At millivolt level and and a small reverse bias a polarized capacitor doesn't care, at least for a short time. Over time it might die much earlier than you expect. Don't try it again.
$endgroup$
– Ale..chenski
1 hour ago
$begingroup$
@Toor What do you mean by the original capacitor type?
$endgroup$
– Utkarsh Verma
1 hour ago
$begingroup$
@Sparky256 Yes, the manufacturer recommends ceramic capacitor, but I don't have such a high valued ceramic capacitor so I used an electrolytic capacitor. As above comment states(and I checked voltage levels) there is no DC bias in that portion of the circuit. Does it imply that I can't use a polarized capacitor in such case?
$endgroup$
– Utkarsh Verma
1 hour ago
|
show 4 more comments
1
$begingroup$
What was the original capacitor type? Also, there is no DC bias in that part of the circuit.
$endgroup$
– Toor
2 hours ago
1
$begingroup$
That is likely a ceramic capacitor. Unless noted otherwise you can assume all aluminum and tantalum capacitors ARE polarized. If you install them backwards across power supply rails (or they have an internal short, much less common in recent decades) they tend to go BANG with some violence, possibly charring the PCB. A ceramic capacitor is not polarized unless it has a black band or polarity mark at one end.
$endgroup$
– Sparky256
1 hour ago
$begingroup$
At millivolt level and and a small reverse bias a polarized capacitor doesn't care, at least for a short time. Over time it might die much earlier than you expect. Don't try it again.
$endgroup$
– Ale..chenski
1 hour ago
$begingroup$
@Toor What do you mean by the original capacitor type?
$endgroup$
– Utkarsh Verma
1 hour ago
$begingroup$
@Sparky256 Yes, the manufacturer recommends ceramic capacitor, but I don't have such a high valued ceramic capacitor so I used an electrolytic capacitor. As above comment states(and I checked voltage levels) there is no DC bias in that portion of the circuit. Does it imply that I can't use a polarized capacitor in such case?
$endgroup$
– Utkarsh Verma
1 hour ago
1
1
$begingroup$
What was the original capacitor type? Also, there is no DC bias in that part of the circuit.
$endgroup$
– Toor
2 hours ago
$begingroup$
What was the original capacitor type? Also, there is no DC bias in that part of the circuit.
$endgroup$
– Toor
2 hours ago
1
1
$begingroup$
That is likely a ceramic capacitor. Unless noted otherwise you can assume all aluminum and tantalum capacitors ARE polarized. If you install them backwards across power supply rails (or they have an internal short, much less common in recent decades) they tend to go BANG with some violence, possibly charring the PCB. A ceramic capacitor is not polarized unless it has a black band or polarity mark at one end.
$endgroup$
– Sparky256
1 hour ago
$begingroup$
That is likely a ceramic capacitor. Unless noted otherwise you can assume all aluminum and tantalum capacitors ARE polarized. If you install them backwards across power supply rails (or they have an internal short, much less common in recent decades) they tend to go BANG with some violence, possibly charring the PCB. A ceramic capacitor is not polarized unless it has a black band or polarity mark at one end.
$endgroup$
– Sparky256
1 hour ago
$begingroup$
At millivolt level and and a small reverse bias a polarized capacitor doesn't care, at least for a short time. Over time it might die much earlier than you expect. Don't try it again.
$endgroup$
– Ale..chenski
1 hour ago
$begingroup$
At millivolt level and and a small reverse bias a polarized capacitor doesn't care, at least for a short time. Over time it might die much earlier than you expect. Don't try it again.
$endgroup$
– Ale..chenski
1 hour ago
$begingroup$
@Toor What do you mean by the original capacitor type?
$endgroup$
– Utkarsh Verma
1 hour ago
$begingroup$
@Toor What do you mean by the original capacitor type?
$endgroup$
– Utkarsh Verma
1 hour ago
$begingroup$
@Sparky256 Yes, the manufacturer recommends ceramic capacitor, but I don't have such a high valued ceramic capacitor so I used an electrolytic capacitor. As above comment states(and I checked voltage levels) there is no DC bias in that portion of the circuit. Does it imply that I can't use a polarized capacitor in such case?
$endgroup$
– Utkarsh Verma
1 hour ago
$begingroup$
@Sparky256 Yes, the manufacturer recommends ceramic capacitor, but I don't have such a high valued ceramic capacitor so I used an electrolytic capacitor. As above comment states(and I checked voltage levels) there is no DC bias in that portion of the circuit. Does it imply that I can't use a polarized capacitor in such case?
$endgroup$
– Utkarsh Verma
1 hour ago
|
show 4 more comments
1 Answer
1
active
oldest
votes
$begingroup$
An aluminum electrolytic will handle a reverse polarity of about 1 volt or so. The cap probably never sees anything near that.
This appnote from Nichicon shows that under 1V the capacitors don't have much of leakage and seems fully functional, see Fig.2-2, with little degradation (see Fig.2-3).
edited 1 hour ago
Ale..chenski
28k11866
answered 1 hour ago
Robert EndlRobert Endl
1,702511
$endgroup$
$begingroup$
Would you suggest its use in a circuit meant to be used for long terms?
$endgroup$
– Utkarsh Verma
1 hour ago
$begingroup$
@UtkarshVerma, please read the Nichicon article and make your own determination. The article mentions " progressing formation of an oxide layer on the cathode electrode", so the cap might not last longer than 200-300 hours.
$endgroup$
– Ale..chenski
1 hour ago
$begingroup$
@Ale..chenski Thanks for the document. I'll read it and post what I'll conclude over here.
$endgroup$
– Utkarsh Verma
1 hour ago
add a comment |
Your Answer
StackExchange.ifUsing("editor", function () {
return StackExchange.using("mathjaxEditing", function () {
StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["\$", "\$"]]);
});
});
}, "mathjax-editing");
StackExchange.ifUsing("editor", function () {
return StackExchange.using("schematics", function () {
StackExchange.schematics.init();
});
}, "cicuitlab");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "135"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f426199%2fwhy-is-the-electrolytic-capacitor-not-polarity-sensitive%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
An aluminum electrolytic will handle a reverse polarity of about 1 volt or so. The cap probably never sees anything near that.
This appnote from Nichicon shows that under 1V the capacitors don't have much of leakage and seems fully functional, see Fig.2-2, with little degradation (see Fig.2-3).
edited 1 hour ago
Ale..chenski
28k11866
answered 1 hour ago
Robert EndlRobert Endl
1,702511
$endgroup$
$begingroup$
Would you suggest its use in a circuit meant to be used for long terms?
$endgroup$
– Utkarsh Verma
1 hour ago
$begingroup$
@UtkarshVerma, please read the Nichicon article and make your own determination. The article mentions " progressing formation of an oxide layer on the cathode electrode", so the cap might not last longer than 200-300 hours.
$endgroup$
– Ale..chenski
1 hour ago
$begingroup$
@Ale..chenski Thanks for the document. I'll read it and post what I'll conclude over here.
$endgroup$
– Utkarsh Verma
1 hour ago
add a comment |
$begingroup$
An aluminum electrolytic will handle a reverse polarity of about 1 volt or so. The cap probably never sees anything near that.
This appnote from Nichicon shows that under 1V the capacitors don't have much of leakage and seems fully functional, see Fig.2-2, with little degradation (see Fig.2-3).
edited 1 hour ago
Ale..chenski
28k11866
answered 1 hour ago
Robert EndlRobert Endl
1,702511
$endgroup$
$begingroup$
Would you suggest its use in a circuit meant to be used for long terms?
$endgroup$
– Utkarsh Verma
1 hour ago
$begingroup$
@UtkarshVerma, please read the Nichicon article and make your own determination. The article mentions " progressing formation of an oxide layer on the cathode electrode", so the cap might not last longer than 200-300 hours.
$endgroup$
– Ale..chenski
1 hour ago
$begingroup$
@Ale..chenski Thanks for the document. I'll read it and post what I'll conclude over here.
$endgroup$
– Utkarsh Verma
1 hour ago
add a comment |
$begingroup$
An aluminum electrolytic will handle a reverse polarity of about 1 volt or so. The cap probably never sees anything near that.
This appnote from Nichicon shows that under 1V the capacitors don't have much of leakage and seems fully functional, see Fig.2-2, with little degradation (see Fig.2-3).
edited 1 hour ago
Ale..chenski
28k11866
answered 1 hour ago
Robert EndlRobert Endl
1,702511
$endgroup$
An aluminum electrolytic will handle a reverse polarity of about 1 volt or so. The cap probably never sees anything near that.
This appnote from Nichicon shows that under 1V the capacitors don't have much of leakage and seems fully functional, see Fig.2-2, with little degradation (see Fig.2-3).
edited 1 hour ago
Ale..chenski
28k11866
answered 1 hour ago
Robert EndlRobert Endl
1,702511
edited 1 hour ago
Ale..chenski
28k11866
edited 1 hour ago
Ale..chenski
28k11866
edited 1 hour ago
Ale..chenski
28k11866
28k11866
answered 1 hour ago
Robert EndlRobert Endl
1,702511
answered 1 hour ago
Robert EndlRobert Endl
1,702511
answered 1 hour ago
Robert EndlRobert Endl
1,702511
1,702511
$begingroup$
Would you suggest its use in a circuit meant to be used for long terms?
$endgroup$
– Utkarsh Verma
1 hour ago
$begingroup$
@UtkarshVerma, please read the Nichicon article and make your own determination. The article mentions " progressing formation of an oxide layer on the cathode electrode", so the cap might not last longer than 200-300 hours.
$endgroup$
– Ale..chenski
1 hour ago
$begingroup$
@Ale..chenski Thanks for the document. I'll read it and post what I'll conclude over here.
$endgroup$
– Utkarsh Verma
1 hour ago
add a comment |
$begingroup$
Would you suggest its use in a circuit meant to be used for long terms?
$endgroup$
– Utkarsh Verma
1 hour ago
$begingroup$
@UtkarshVerma, please read the Nichicon article and make your own determination. The article mentions " progressing formation of an oxide layer on the cathode electrode", so the cap might not last longer than 200-300 hours.
$endgroup$
– Ale..chenski
1 hour ago
$begingroup$
@Ale..chenski Thanks for the document. I'll read it and post what I'll conclude over here.
$endgroup$
– Utkarsh Verma
1 hour ago
$begingroup$
Would you suggest its use in a circuit meant to be used for long terms?
$endgroup$
– Utkarsh Verma
1 hour ago
$begingroup$
Would you suggest its use in a circuit meant to be used for long terms?
$endgroup$
– Utkarsh Verma
1 hour ago
$begingroup$
@UtkarshVerma, please read the Nichicon article and make your own determination. The article mentions " progressing formation of an oxide layer on the cathode electrode", so the cap might not last longer than 200-300 hours.
$endgroup$
– Ale..chenski
1 hour ago
$begingroup$
@UtkarshVerma, please read the Nichicon article and make your own determination. The article mentions " progressing formation of an oxide layer on the cathode electrode", so the cap might not last longer than 200-300 hours.
$endgroup$
– Ale..chenski
1 hour ago
$begingroup$
@Ale..chenski Thanks for the document. I'll read it and post what I'll conclude over here.
$endgroup$
– Utkarsh Verma
1 hour ago
$begingroup$
@Ale..chenski Thanks for the document. I'll read it and post what I'll conclude over here.
$endgroup$
– Utkarsh Verma
1 hour ago
add a comment |
Thanks for contributing an answer to Electrical Engineering Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f426199%2fwhy-is-the-electrolytic-capacitor-not-polarity-sensitive%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
1
$begingroup$
What was the original capacitor type? Also, there is no DC bias in that part of the circuit.
$endgroup$
– Toor
2 hours ago
1
$begingroup$
That is likely a ceramic capacitor. Unless noted otherwise you can assume all aluminum and tantalum capacitors ARE polarized. If you install them backwards across power supply rails (or they have an internal short, much less common in recent decades) they tend to go BANG with some violence, possibly charring the PCB. A ceramic capacitor is not polarized unless it has a black band or polarity mark at one end.
$endgroup$
– Sparky256
1 hour ago
$begingroup$
At millivolt level and and a small reverse bias a polarized capacitor doesn't care, at least for a short time. Over time it might die much earlier than you expect. Don't try it again.
$endgroup$
– Ale..chenski
1 hour ago
$begingroup$
@Toor What do you mean by the original capacitor type?
$endgroup$
– Utkarsh Verma
1 hour ago
$begingroup$
@Sparky256 Yes, the manufacturer recommends ceramic capacitor, but I don't have such a high valued ceramic capacitor so I used an electrolytic capacitor. As above comment states(and I checked voltage levels) there is no DC bias in that portion of the circuit. Does it imply that I can't use a polarized capacitor in such case?
$endgroup$
– Utkarsh Verma
1 hour ago